Bitacem 120 2 Components Waterproofing
About Bitacem 120 2 Components Waterproofing


BITACEM 120 is a cement-based two-component waterproofing coating made from modified acrylic copolymer combining the best qualities.


BITACEM 120 can be used in all areas where a leak proof coating is required with or without protection. BITACEM 120 can be installed directly on the surface of work areas such as roofs, balconies, terraces, bathrooms, flower pots, swimming pools, clean water tanks, basements, concrete in seawater, tunnels and others, new buildings or renovations.


BITACEM 120 is non-toxic and highly recommended for clean water baths. BITACEM 120 has very strong adhesion when cleaned and has a solid surface.


BITACEM120 must be installed on a clean and sturdy surface, free of oil and other contaminants. It is recommended to wet the area with clean water before applying the first coat. BITACEM120 is mixed in a ratio of two parts powder to one part liquid. Put the liquid part first in a clean container then add the powdered part gradually, stir gently to form a paste, let the mixture sit for five minutes and stir again. Now the mix is ​​ready to use. BITACEM120 must be installed at least two coats, apply the first layer with a brush for 0.5 kg /m2. although BITACEM120 will dry within 1 hour, please wait 4-6 hours within 24 hours for second coat installation. Avoid installing BITACEM120 under direct sunlight or rain, if this cannot be avoided, protect it firmly. Clean the work tool with water.

PACKAGING: Set of 3 kg (1 kg liquid 2 kg powder) and 30 kg (10 kg liquid 20 kg powder)

CONSUMPTION : In theory 1 : 2 Kg/m2

STORAGE INSTRUCTIONS: Store in a cool and dry place, avoid heat sources, and keep out of reach of children.

Scroll to Top